manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 15 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 15

xiii

Thank you for purchasing the Canon imagePRESS C1+. Please read this manual thoroughly before 
operating the machine to familiarize yourself with its capabilities, and make the most of its many 
functions. After reading this manual, store it in a safe place for future reference.

 

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, restrictions, handling 
precautions, and instructions that should be observed for safety.

WARNING

.

Indicates a warning concerning operations that may lead to death or injury to 
persons if not performed correctly. To use the machine safely, always pay 
attention to these warnings.

CAUTION

.

Indicates a caution concerning operations that may lead to injury to persons, or 
damage to property if not performed correctly. To use the machine safely, always 
pay attention to these cautions.

IMPORTANT

.

Indicates operational requirements and restrictions. Be sure to read these items 
carefully to operate the machine correctly, and avoid damage to the machine.

NOTE

.

Indicates a clarification of an operation, or contains additional explanations for a 
procedure. Reading these notes is highly recommended.

Preface

How to Use This Manual

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments