![background image](http://html.mh-extra.com/html/canon/imageformula-scanfront-400/imageformula-scanfront-400_set-up-and-operation-manual_63007020.webp)
20
Chapter 2 ScanFront Setup
ScanFront Setup Overview
Follow the procedures below to set up the ScanFront
1. Checking the Supplied Accessories (See p. 21)
Confirm that all of the supplied accessories are included.
2. Removing the Packing Materials (See p. 22)
Remove the packing materials protecting the scanner.
Move the scanner to the desired installation site, and
connect the AC adaptor and network cable.
4. Turning the Power ON and OFF (See p. 26)
Use the power button to turn the scanner ON, and press
[Power off] on the touch panel to turn it OFF.
5. ScanFront Setup (See p. 28)
To set up the scanner, configure the administrator settings.
This guide describes how to configure the network
settings, how to set the date and time and confirm the time
zone, and how to configure mail server settings for sending
e-mail.
For details on other settings, refer to the
ScanFront 400
INSTRUCTIONS
(electronic manual).
*
For a Web browser, use Microsoft Internet Explorer 6.0 or later
or Firefox 3.5 or later.
• Network Settings
Configure the [Device Name] and [IP Address] settings
needed to connect to the network. (See p. 29.)
• Configuring the Date and Time and Confirming the
Time Zone
Set the date and time and confirm the time zone. (See
p. 32.)
• Mail Server Settings
Configure the mail server to be used for sending e-mail.
(See p. 34.)
Summary of Contents for imageFORMULA ScanFront 400
