![background image](http://html.mh-extra.com/html/canon/imageformula-p-215/imageformula-p-215_user-manual_62994028.webp)
28
Basic Operation
Documents
The scanner can scan documents ranging in size from business cards to A4/LTR. The document sizes that this scanner can scan are shown below.
1) Up to 1,000 mm (39.4") in Long Document mode
3) Plastic cards
2) When using the card slot
4) Up to 1.4 mm (0.055") for embossed cards
IMPORTANT
The documents to be scanned must satisfy certain criteria. Read the
following items carefully.
• When scanning multiple documents of different sizes, place the
documents so that they cover the entire span of the feed rollers by
aligning the centers and leading edges of the documents.
• It is recommended that documents exceeding 356 mm (14") in size
are fed one sheet at a time.
• Scanning documents before the ink is dry can cause problems with
the scanner. Always make sure that the ink on a document is dry
before scanning it.
• Scanning documents that are written in pencil or similar material
may make the rollers and scanning glass dirty, which can lead to
smudges on the scanned image and transfer the dirt to subsequent
documents. Always clean the internal parts of the scanner after
scanning such documents.
• When scanning a two-sided document that is printed on thin paper,
the image on the opposite side of each page may show through. In
this case, adjust the scanning intensity in the application software
before scanning the document.
• It is recommended that thin documents are fed one sheet at a time.
Document type
Width
Length
Thickness (density)
Thickness
Plain paper
50.8 to 216 mm
(2 to 8.5")
70 to 356 mm
(2.756 to 14")
1)
52 to 128 g/m
2
(14 to 34 lb bond)
0.06 to 0.15 mm
(0.0024 to 0.0059")
Postcard
88.9 to 108 mm
(3.5 to 4.25")
127 to 152.4 mm
(5 to 6")
128 to 225 g/m
2
(34 to 60 lb bond)
0.15 to 0.3 mm
(0.0059 to 0.0118")
Business card
49 to 55 mm
(1.93 to 2.17")
85 to 91 mm
(3.35 to 3.58")
128 to 225 g/m
2
(34 to 60 lb bond)
0.15 to 0.3 mm
(0.0059 to 0.0118")
Other card
2) 3)
86 mm
(3.39")
54 mm
(2.13")
—
0.76 mm
(0.03") or less
4)
Feed roller
Align the leading edges
Align the centers