manualshive.com logo in svg

Canon imageFORMULA DR-S150, User Manual

Share
Download
Canon imageFORMULA DR-S150 User Manual Download Page 6

6

Symbols Used in This Manual

The following symbols are used in this manual to explain procedures, 
restrictions, handling precautions, and instructions that should be 
observed for safety.

WARNING

Indicates a warning concerning operations that may lead to death 
or injury to persons if not performed correctly. To use the scanner 
safely, always pay attention to these warnings.

CAUTION

Indicates a caution concerning operations that may lead to injury to 
persons, or damage to property if not performed correctly. To use 
the scanner safely, always pay attention to these cautions.

IMPORTANT

Indicates operational requirements and restrictions. Be sure to 
read these items carefully to operate the scanner correctly, and 
avoid damaging the scanner.

Hint

Indicates a clarification of an operation, or contains additional 
explanations for a procedure. Reading these notes is highly 
recommended.

Summary of Contents for imageFORMULA DR-S150

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands