![background image](http://html.mh-extra.com/html/canon/imageformula-cr-l1/imageformula-cr-l1_user-manual_62927011.webp)
11
Installation Location
For operation, maintenance, and ventilation, make sure that there is enough
space around the scanner.
Avoid placing the scanner in the following places. It may cause a malfunction
and adversely affect the scanner or your computer.
• Places exposed to direct sunlight
If installation in such places is unavoidable, provide a curtain or similar object
to shade the scanner.
• Places subject to dust and fumes
Dust and cigarette fumes adversely affect the components inside the
scanner.
• Near running water, a heat source, water vapor, or in an area, such as a
laboratory exposed to ammonia gas, paint thinner, or other volatile chemicals
• Places subject to excessive vibration and shock
• Places subject to rapid changes in temperature or humidity
Condensation occurring inside the scanner may impair image quality. Place
the scanner in a room that is within the following range:
Room temperature: 10°C to 32.5°C (50°F to 90.5°F)
Relative humidity: 20% to 80% RH
20% to 50% RH when using the imprinter
Use the recommended operating environment for the ink cartridge when
using the imprinter.
• Near electronic equipment or heavy equipment that generates a strong
magnetic field, such as a speaker, TV, and radio
Power Supply
• Connect only to a power outlet of the rated voltage and power supply
frequency (either 120V, 60 Hz or 220-240V, 50/60 Hz, depending on your
region).
• Make sure that the scanner is connected to an independent power outlet. Do
not plug the scanner into an outlet shared with another device. If you use an
extension cord, make sure that the extension cord is rated for the current
requirements of the scanner.
• If you are unsure of anything relating to the power supply, contact your local
authorized Canon dealer or service representative for further information.
• Never place an object on top of the power cord or step on the power cord.
• Never bundle the power cord or wrap the cord around an object, such as a
table leg.
• Do not tug on the power cord. When you remove the power cord, grip it by
the power plug head.
• Keep the area around the power outlet free of obstacles.
• Connect only to a power outlet of the rated voltage and power supply
frequency (either 120V, 60 Hz or 220-240V, 50/60 Hz, depending on your
region).
• Do not connect to power outlets with other electrical devices. Also, when
using an extension cord, make sure that the extension cord is rated for the
current requirements of the scanner.
• Disassembling and/or reassembling the AC adapter is extremely dangerous
and should not be attempted under any circumstances.
• Do not place heavy objects on the AC adapter or power cord. Do not place
the adapter or cords in an area where they are likely to be stepped on.
• Do not use the power cord while it is bundled.
• Never pull directly on the power cord. To remove the plug from the outlet,
grasp the plug directly and remove it from the outlet.
• Keep the area around the power plug clear of articles so that the power plug
can be disconnected in an emergency.
• Use only the AC adapter provided with the product. Do not use the scanner’s
AC adapter with any other product.
• If you have any questions about the AC adapter, contact your local authorized
Canon dealer or service representative for further information.
Moving the Scanner
When you move the CR-L1, hold it firmly with both hands and carry it carefully.
Do not hold the scanner by the Eject Stopper. The scanner weighs
approximately 2.1 kg (4.6 lb).
WARNING
When moving the scanner, be sure to turn OFF the power and remove any
cables. If the cables are not removed before moving the scanner, you may
damage the plugs or connector by forcibly pulling them out.