![background image](http://html1.mh-extra.com/html/canon/imageformula-cr-80/imageformula-cr-80_instructions-manual_4214523037.webp)
37
F
Scanning starts.
NOTE
When printing with the imprinter, ink may get on the leading edge of the
document because the documents are ejected onto the printed surface.
Confirming Proper Document Feeding
Depending on the thickness of documents scanned with the CR-50/80
and the paper thickness setting, double feeds or feeding errors may
occur.
After installing the CR-50/80 or before scanning documents of a
different thickness, perform the procedure below to confirm that
documents are separated one sheet at a time. If documents do not
feed properly, see “Adjusting the Separation Roller Gap,” on p. 52 to
adjust for paper thickness.
A
Start the Scanning Utility.
Ink residue
Printed text (back side)