Canon
imageCLASS X MF1643 II Series Service Guide
imageCLASS X MF1643 II Series
Service Guide
January 2022
Revision 1
Page 15
B. Installation Space Requirements
The installation site must provide enough space for unrestricted operation,
maintenance work, and proper ventilation. The machine dimensions are in
diagrams on the following pages. Every attempt should be made to install the
equipment in a room that allows for the proper servicing and maintenance of
the equipment, and ensures that issues, such as ventilation, odors, and dust
accumulation are not a concern.
IMPORTANT
•
Keep the back of the machine at least 4” (100 mm) away from a wall, and
make sure that approximately 19 3/4
”
(500 mm) of space is left around the
front, left, and right sides of the machine for the proper servicing of the
equipment.
•
The floor or worktop must be level (with no bows) and flat for the stabilization
and support of the machine.
Table 12 – Space Requirements
Configuration
Dimensions
imageCLASS X MF1643iF II
imageCLASS X MF1643i II
