Canon imageCLASS X LBP1238, Service Manual

Page: 71 / 220

12/09 2015 10:14AM
****************************
*** E-RDS-COM-LOG***
****************************
No.01 DATE 12/09 2015 TIME 03:21 AM CODE 05000003
Information SUSPEND: Communication test is not performed.
No.02 DATE 12/09 2015 TIME 03:21 AM CODE 00000000
Information SUSPEND: mode changed.
No.03 DATE 12/09 2015 TIME 03:18 AM CODE 05000003
Information SUSPEND: Communication test is not performed.
No.04 DATE 12/09 2015 TIME 03:18 AM CODE 00000000
Information SUSPEND: mode changed.
No.05 DATE 12/09 2015 TIME 01:56 AM CODE 05000003
Information SUSPEND: Communication test is not performed.
Output sample
Error Message List
Error information displayed on the communication error log detail screen is shown below.
(The "server" described here means Remote Monitoring Server.)
Code Character strings Cause Remedy
0000
0000 SUSPEND: mode changed. Operation mode mismatch Execute initialization of the E-RDS settings
(ERDS-DAT).
0500
0003 SUSPEND: Communication test
is not performed. E-RDS was enabled, but the main power of
the device was turned OFF and then ON
without performing a communication test. Perform and complete a communication test
(COM-TEST).
0xxx 0003 Server schedule is not exist The schedule does not exist. Perform and complete a communication test
(COM-TEST).
0xxx 0003 Communication test is not per-
formed
Communication test has not been comple-
ted. Perform and complete a communication test
(COM-TEST).
84xx 0003 E-RDS switch is setted OFF E-RDS is not enabled. Set the value of the E-RDS setting (E-RDS)
to 1, and perform a communication test
(COM-TEST).
8600
0002
8600
0003
8600
0101
8600
0201
8600
0305
8600
0306
8600
0401
8600
0403
8600
0414
8600
0415 Event Registration is Failed Processing in the device (event processing)
failed. Turn OFF and then ON the power of the de-
vice. If the error occurs again after turning
OFF and then ON the power, replace the
system software of the device (version up-
grade).
8700
0306 SRAM version unmatch! An invalid value has been entered at the
beginning of the NVMEM area of E-RDS
(nonvolatile memory area). Turn OFF and then ON the power of the de-
vice.
8700
0306 SRAM AeRDS version unmatch! An invalid value has been entered at the
beginning of the NVMEM area of E-RDS
(nonvolatile memory area).
Turn OFF and then ON the power of the de-
vice.
3. Technical Explanation (System)
61