manualshive.com logo in svg

Canon imageCLASS MPC190, Basic Manual, Page: 70 / 91

Share
Download
Canon imageCLASS MPC190 Basic Manual Download Page 70

9-8

Troubleshooting

Chapter 9

If nothing displays in the LCD (if there is no power)

When you connect the power cord to the machine and wall outlet, and press [ON/OFF], the 
machine powers up and a message is displayed in the LCD.
While the Alarm light blinks, the machine is initialising and you will not be able to use it. Wait 
until the Alarm light stops blinking.
If nothing is displayed in the LCD, make the checks in the following order until something is 
displayed.

1. Is the power cord correctly connected?

Securely connect the power cord to the machine and wall outlet.

2. Have you pressed [ON/OFF]?

The machine will power up and the LCD will show a message when you connect the power cord and 
press [ON/OFF].

3. Check that the wall outlet is working normally.

Connect another electrical appliance to the wall outlet and check whether the wall outlet is working 
properly.

4. Connect the power cord directly to the wall outlet.

Disconnect the power cord from any table taps, OA taps or extension cords and connect directly to the 
wall outlet. If the machine powers up when the power cord is connected directly, the table taps, OA 
taps or extension cords are probably defective and should be replaced.
If they have a power switch, turn it on.

5. Check that the power cord is not defective.

Either replace the power cord with another, or using a tester, check whether the cord is defective.

Summary of Contents for imageCLASS MPC190




























































































Reviews:

No comments