Canon imageCLASS MPC190 Basic Manual Download Page 21 | Manualshive

Page: 21 / 91

Canon imageCLASS MPC190 Basic Manual Download Page 21

Chapter 3

Print media handling

3-3

3

Print media handling

Matte Photo Paper MP-101

A matte, thick paper that produces vivid colour output and is waterproof. Ideal for many uses
such as paper crafts, calendars, and photographs with a matte finish. You can also use this paper
for borderless printing.

Size

: A4

Quantity

: 10 sheets

Paper thickness lever position

: Left

Use for

: Printing from your computer

• Load the paper with the whiter side facing up.
• In the printer driver, select “Matte Photo Paper” as the print media type.
• Remove each sheet as soon as it is printed.

Photo Paper Plus Glossy PP-101

A thick, coated paper designed to produce a glossy finish and vivid colour output. This paper is
also waterproof. Suitable for printing high-quality photographs and for borderless printing.

Size

: A4, 101.6

×

152.4 mm (4

×

6 in.)

Quantity

: 20 sheets

Paper thickness lever position

: Left

Use for

: Printing from your computer

• Load the paper with the glossy side facing up.
• In the printer driver, select “Photo Paper Plus Glossy” as the print media type.
• Remove each sheet as soon as it is printed.

Photo Paper Pro PR-101

A thick paper with a treated surface that enhances gloss and provides superior colour
reproduction. It is ideal for printing high-quality photographs.

Size:

A4,

Letter, 101.6

×

152.4 mm (4

×

6 in.)

Quantity:

1 sheet, 20 sheets (101.6

×

152.4 mm/4

×

6 in. size)

Paper thickness lever position:

Left

Drying time:

30 minutes

Use for:

Printing from your computer/copying

• Load the paper with the glossier side facing up.
• For 101.6

×

152.4 mm (4

×

6 in.) size paper, remove the sheets from the paper output tray

before the count reaches 20. For A4- or letter-size paper, remove each sheet as soon as it is
printed.

Photo Paper Pro PC-101S

Made from the same stock as Photo Paper Pro PR-101, these cards are intended for printing
images that cover the entire surface of the card, without a white border. This paper is ideal for
printing high quality photographs.

Size:

101.6

×

152.4 mm (4

×

6 in.)

Quantity:

20 sheets

Paper thickness lever position:

Left

Drying time:

30 minutes

Use for:

Printing from your computer

• Load the paper with the glossy side facing up.
• Remove the sheets from the paper output tray before the count reaches 20.

«
...
19
20
21
22
23
...
»

Summary of Contents for imageCLASS MPC190




























































































Reviews:

No comments