manualshive.com logo in svg

Canon imageCLASS MP700, Quick Reference Manual, Page: 70 / 96

Share
Download
Canon imageCLASS MP700 Quick Reference Manual Download Page 70

10-12

Troubleshooting

Chapter 10

If the nozzle check pattern does not print properly

Refer to 

Maintaining the printhead

, p. 9-3.

Interpreting the messages

When the Alarm light blinks

Check the message in the LCD. If there is a message, follow the instructions and correct the 
error. Then to resume operation, press [Resume]. The Alarm light will turn off.
If the error remains, turn off the machine and disconnect the power cord. Wait 15 seconds, then 
reconnect the power cord and turn on the power. 

If you cannot clear a paper jam

Turn off the machine and disconnect the power cord. Wait five seconds, reconnect the power 
cord and turn on the power. If the problem has been resolved, the Alarm light will turn off.

If the Alarm light still lights even after you have turned the power on again

Contact your local authorized Canon dealer or the Canon help line.

Error codes are printed in the ACTIVITY REPORT.

5

Pull out the jammed page from the ADF.

6

Lower the paper release lever 

A

 and then 

close the feeder cover.

• If [Stop/Reset] is pressed during scanning and the 

document remains in the ADF, wait for the 
machine to return to standby mode, then press 
[Resume]. Documents left in the ADF will be 
ejected automatically.

A

Summary of Contents for imageCLASS MP700

































































































Reviews:

No comments