manualshive.com logo in svg

Canon imageCLASS MP700, Quick Reference Manual, Page: 69 / 96

Share
Download
Canon imageCLASS MP700 Quick Reference Manual Download Page 69

Chapter 10

Troubleshooting

10-11

10

Troubleshooting

If there are repeated paper jams

Paying attention to the following points, reload the paper.

1. Fan out the sheets of paper well so that they do not stick together.
2. Align the edges of the paper.
3. Adjust the paper guide correctly.
4. Make sure the paper stack does not exceed the paper limit mark (

s

|

).

5. Make sure the paper loaded does not exceed the capacity of the multi-purpose tray (

 p. 2-2).

6. Do not force paper into the multi-purpose tray.
7. Only use the same type of paper.
8. Use recommended print media (

 p. 2-2).

 

Removing jammed documents 

If documents jam in the ADF or do not feed properly, <DOC. TOO LONG> is displayed in the LCD.
You do not need to turn off the power when clearing document jams.

1

Press [Stop/Reset].

2

If a multipage document is loaded, remove 
from the ADF all pages except for the 
jammed page.

3

Open the feeder cover.

4

Raise the paper release lever 

A

 and slide 

the page under the roller towards the 
feeder cover.

A

Summary of Contents for imageCLASS MP700

































































































Reviews:

No comments