Canon imageCLASS MP390 User Manual Download Page 180

Page: 180 / 189

178

Appendix

Chapter 15

• Photo Paper Pro PC-101S printable area:

Photo Paper Pro PC-101S: 109.6 mm

160.4 mm

(4 3/8 in.

6 3/8 in.)

NOTE

• The printing area of Photo Paper Pro PR-101 is identical to that of

A4-size paper. (See page 177.)

• Envelope printable areas:

European DL: 190.5 mm

103.2 mm (7 1/2 in.

4 1/8 in.)

US COM 10: 211.5 mm

98.2 mm (8 3/8 in.

3 7/8 in.)

Ink specifications

Ink tank colors/capacity

• Black (BCI-24 Black): approx. 300*, approx. 580**
• Color (BCI-24 Color): approx. 160**

* 1500 characters per page, normal text, at standard and plain paper mode with Windows XP

printer driver.

** Based on printing the ISO JIS-SCID No. 5 pattern at standard and plain paper mode with

Windows XP printer driver.

Copy specifications

Copy speed

No. of copies
Density adjustment
Zoom

• Black & white: <

FAST

> mode approx. 18 pages/

minute (A4 size)

• Color:

FAST

> mode approx. 12 pages/

minute (A4 size)

(Based on BJ printer specific speed test pattern.)

• Maximum 99 copies
• 9 levels
• 25% to 400%

3.4 mm (1/8 in.)

3.0 mm (1/8 in.)

26.5 mm (1 in.)

Summary of Contents for imageCLASS MP390






























































































































































































Search results

Summary of Contents for imageCLASS MP390

Reviews:

Canon imageCLASS MP390, User Manual, Page: 180 / 189

Search results

Summary of Contents for imageCLASS MP390

Reviews: