Canon imageCLASS MF8450c Basic Operation Manual Download Page 10 | Manualshive

Page: 10 / 504

background image

Prefac
e

x

Preface

Preface

Thank you for choosing a Canon product. Before using the machine, please read the
following instructions for your safety.

Important Safety Instructions

Except as specifically described in this guide, do not attempt to service the machine yourself. Never attempt to disassemble the
machine: opening and removing its interior covers will expose you to dangerous voltages and other risks. For all service, contact your
local authorized Canon dealer.

Handling and Maintenance

Be careful when removing printed paper from output trays or when aligning it, because it may be hot and result in burn injury.

Follow all warnings and instructions marked on the machine.
Do not subject the machine to strong physical shocks or vibrations.
Always unplug the machine before moving or cleaning it.
To avoid paper jams, never unplug the power cord, open the left cover or add or remove paper in the
machine while printing.
When transporting the machine, be sure to remove the toner cartridge from the machine.
Place the toner cartridge in its original protective bag or wrap it in a thick cloth to prevent exposure to light.
Always use the hand grips (on the left and right side) of the machine when you lift the machine. Never lift
the machine by any of its trays or attachments.
Do not insert any objects into the slots or openings on the machine since they may touch dangerous
voltage points or short out parts. This could result in fire or electric shock.
Do not allow small objects (such as pins, paper clips, or staples) to fall into the machine.
To avoid spillage in or around the machine, do not eat or drink near it.
Keep the machine clean. Dust accumulation can prevent the machine from operating properly.
Toner cartridge for this machine will be available for at least seven (7) years (or any such longer period as
required by applicable laws) after production of this machine model has been discontinued.
Turn off the main power switch and unplug the power cord from the wall outlet and contact your local
authorized Canon dealer in any of the following cases:

When the power cord or plug is damaged or frayed.
If liquid or small object has fallen into the machine.
If the machine has been exposed to rain or water.
If the machine does not operate normally when you have followed the instructions in this guide.

–
–
–
–

–
–
–

–

–
–
–
–

–

•
•
•
•

«
...
8
9
10
11
12
...
»

Summary of Contents for imageCLASS MF8450c

























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imageCLASS MF8450c

Brand: Balanced Body Pages: 4

AJSPD850P - P2 DECK

Brand: Panasonic Pages: 73

Brand: Panasonic Pages: 30

Brand: EarthQuake Pages: 28

Brand: TAIKO Audio Pages: 24

Brand: 3M Pages: 48

Brand: 3M Pages: 19

Speedglas G5-01

Brand: 3M Pages: 62

Quickfit Nexus Exit

Brand: Thomas & Betts Pages: 2

Brand: Farmi Forest Corporation Pages: 32

BOMAG BW 100 ADM-5

Brand: Fayat Pages: 216

Brand: B medical systems Pages: 28

Brand: Tascam Pages: 8

Brand: Konica Minolta Pages: 32

Brand: S.R.Smith Pages: 8

Brand: S.R.Smith Pages: 23

NavBoard ZipFlip

Brand: S&S Precision Pages: 6

Brand: Vari Lite Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands