Canon imageCLASS MF8380Cdw, Basic Operation Manual

Page: 44 / 192

2-4
D
ocumen
t and
P
aper
Handling
This section describes placing the documents on the platen
glass or loading them in the feeder.
Placing Documents on the Platen Glass
1
Open the feeder.
2
Place your document face down.
3
Align the document with the appropriate paper
size marks.
If the document does not match any of the paper size marks, align
the center of your document with the arrow mark.
4
Close the feeder or the platen glass cover gently.
The machine is ready to scan or copy the document.
When scanning or copying is complete, remove the document
from the platen glass.
Placing Documents in the Feeder
Before loading the documents in the feeder, see “IMPORTANT
(Placing Documents in the Feeder).”
1
Spread the document guides a little wider than
the actual document width.
2
Pull out the tray extension before loading the
large size document.
Pull out the tray extension when the document is hanging out of
the document feeder tray.
Placing Documents
CAUTION
Precautions when closing the feeder or the platen
glass cover
Be careful not to get your fingers caught.
This may cause personal injury. Do not press down the
feeder or the platen glass cover forcefully. This may
damage the platen glass and cause personal injury.