manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 221

Sending Documents

4‑86

Storing/Editing Favorites Buttons

You can set any possible combination of send settings and register them in a favorites 
button in memory. There are 18 favorites buttons and they can be assigned names for 
increased convenience. This feature is useful for registering frequently used send settings.

The send settings registered as favorites buttons in memory are not erased, even if the power is turned off.
If an address included in a favorites button is deleted from the Address Book, it is also deleted from the 
settings registered in the favorites button.

Registering/Editing a Favorites Button

–
–

●

1

 

Specify the send settings that you 
want to register.

2

 

Press   (Additional Functions).

3

 

4

 

5

 

If the desired setting is not displayed, press 
[

▼

] or [

▲

] to scroll to the desired setting.

6

 

①

 Select a Favorites Button ([M1] to [M18]) 

for registering the send settings.

②

 Press [Register/Edit].

If the desired Favorites Button is not 
displayed, press [

▼

] or [

▲

] to scroll to the 

desired Favorites Button.
Keys that already have settings stored in 
them are displayed with a black square (

■

) 

in the lower right corner of the key.

–

–

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands