manualshive.com logo in svg

Canon IMAGECLASS MF7400, Basic Operation Manual

Share
Download
Canon IMAGECLASS MF7400 Basic Operation Manual Download Page 122

3‑25

Copying

Two-Sided Copying

This mode enables you to make two-sided copies from one-sided or two-sided 
originals, or make one-sided copies from two-sided originals.

You may not be able to make two‑sided copies on some types of paper, depending on the paper.
If you are copying in the 2‑Sided mode, align the top edge of the original with the back edge of the platen 
glass (by the arrow in the top left corner), or with the back edge of the feeder.
The 2‑Sided mode you have selected is displayed above [2‑Sided] on the Copy Basic Features screen.
Paper used to make two‑sided copies must conform to the following specifications:

Paper size: 11" x 17", LGL, LTR, LTRR, EXEC, STMTR (envelopes cannot be used for two‑sided copying)
Paper weight: 17 to 24 lb bond (64 to 90 g/m

2

)

If you select [Irreg. Size] for copying, you cannot use the 1 

▶

 2‑Sided, 2 

▶

 2‑Sided, Book 

▶

 2‑Sided, or 2‑page 

Separation mode. (See chapter 3, “Copying,” in the Reference Guide.)
If you select [Envelope] for copying, you cannot use 1 

▶

 2‑Sided, 2 

▶

 2‑Sided, Book 

▶

 2‑Sided, 2‑page 

Separation mode. (See chapter 3, “Copying,” in the Reference Guide.)

Making Two-Sided Copies from One-Sided Originals (1 

▶ 

2-Sided)

This feature enables you to make two‑sided copies from one‑sided originals.

Originals

Copy

Making Two-Sided Copies from Two-Sided Originals (2 

▶ 

2-Sided)

This feature enables you to make two‑sided copies from two‑sided originals. If the originals 
are placed in the feeder, they are automatically turned over to make two‑sided copies.

Original

Copy

–
–

–
–

–
–

–

–

●

●

Summary of Contents for IMAGECLASS MF7400





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands