manualshive.com logo in svg

Canon imageCLASS MF6540, Basic Operation Manual

Share
Download
Canon imageCLASS MF6540 Basic Operation Manual Download Page 223

Troubleshooting

11-20

If You Cannot Solve a Problem

Customer Support (U.S.A.)

If you cannot solve the problem after having referred to the information in this chapter, 
contact Canon Customer Care Center at 1-800-828-4040 between the hours of 8:00 A.M. 
to 8:00 P.M. EST for U.S.A. and 9:00 A.M. to 8:00 P.M. EST for Canada Monday through Friday 
and 10:00 A.M. to 8:00 P.M. on Saturday. On-line support for 24 hours is also available at the 
website.
http://www.canontechsupport.com/

Customer Support (Canada)

Canon Canada Inc., offers a full range of customer technical support options*:

For step-by-step troubleshooting, e-mail technical support, the latest driver or document 
downloads, and answers to frequently asked questions, visit 
http://www.canon.ca/
Free live technical support 9 A.M. to 8 P.M. EST Monday through Friday (excluding 
holidays) for products still under warranty 1-800-652-2666
For the location of the authorized service facility nearest you, visit  
http://www.canon.ca/ or 1-800-652-2666
If the problem cannot be corrected by using one of the above technical support options, 
repair options are available at the time of your call to the live technical support number 
above or via the website at http://www.canon.ca/
Support program specifics are subject to change without notice.

–

–

–

–

*

Summary of Contents for imageCLASS MF6540















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands