manualshive.com logo in svg

Canon imageCLASS MF6540, Basic Operation Manual

Share
Download
Canon imageCLASS MF6540 Basic Operation Manual Download Page 187

Maintenance

10-12

Replacing the Toner Cartridge

When the LCD displays <TONER LOW/
PREPARE NEW TONER>, redistribute 
toner in the toner cartridge. If the 
message persists, replace the toner 
cartridge.
When toner empty error occurs while 
receiving fax, printing fax is interrupted 
and the received data will be stored 
in the memory. If you set <CONT. 
PRINTING> in <PRINTER SETTINGS> in 
<FAX SETTINGS> to <KEEP PRINTING>, 
you can keep printing fax documents 
or reports without replacing the toner 
cartridge.
The default setting for <CONT. 
PRINTING> is <RX TO MEMORY>. (See 
“CONT. PRINTING,” on p. 12-17.)

When <CONT. PRINTING> is set to <ON>, the printed 
documents may be light or blurred because of lack 
of toner. The data is erased when the documents are 
printed out, so you can not print the same documents 
again.

Redistributing Toner

1

 

Open the left cover.

2

 

Grasp the blue plastic pull tab (A) 
on the toner cartridge.

Summary of Contents for imageCLASS MF6540















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands