1
2
3
4
5
6
7
8
6-4
Report Items
The following items are displayed in the Transmission Report:
●
Transaction description
●
TX/RX NO: Transaction number
●
RECIPIENT ADDRESS: Recipient’s fax/telephone number
●
DESTINATION ID: Registered name for speed dial
●
ST. TIME: Transmission time
●
TIME USE: Transmission duration
●
PAGES SENT: Number of pages sent
●
RESULT: Result of transaction
– OK: Transmission successful
– NG: Transmission failed
– STOP: Transmission manually canceled before completion
– BUSY/NO SIGNAL: The line is busy or the recipient does not
answer your call
●
Error code: For descriptions of error codes, see
Chapter 12, “Troubleshooting,” in the Basic Guide.
■
RX REPORT
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <REPORT
SETTINGS>, then press [OK].
3.
Confirm that <SETTINGS> is displayed, then
press [OK].
4.
Use [
] or [
] to select <RX REPORT>,
then press [OK].
5.
Use [
] or [
] to select the setting you
want, then press [OK].
<PRINT ERROR ONLY>: Prints a report only when a reception
error occurs.
<OUTPUT YES>: Prints a report every time you receive a
document.
<OUTPUT NO>: Does not print a report.
6.
Press [Stop] to return to standby mode.
