1
2
3
4
5
6
7
8
3-21
4.
Click [Change].
5.
Specify the [IP Address], [Subnet Mask], and
[Gateway Address] settings.
6.
In [Use LPD], specify whether to display the
current print setting by using an LPD
application.
7.
In [Raw Settings], specify whether to display
the current print setting by using a Raw
application.
8.
In [Use IP Address Range Settings], specify
whether to restrict access from computers
whose IP address are specified in this
section.
9.
In [RX MAC Address Settings], specify
whether to restrict access from computers
whose MAC address are specified in this
section.
10.
Click [OK].