manualshive.com logo in svg

Canon imageCLASS MF5950dw, Basic Operation Manual

Share
Download
Canon imageCLASS MF5950dw Basic Operation Manual Download Page 154

9-14

Troubleshooting

The machine cannot be used while the power supply is cut off.

When there is a power failure, you can or cannot perform the following fax operations.

•  You cannot send or receive faxes.
•  You may not be able to make a call using the external telephone, depending on your telephone system.
•  You may be able to answer a call using the external telephone, depending on your telephone system.

 IMPORTANT 

To save documents in memory when the power supply is cut off

If the power is lost due to a power failure or the power cord is accidentally unplugged, data can be stored in memory for approximately 5 minutes 
so you can back it up. To store document in the memory requires the printer’s built-in battery must be charged for more than 6 hours. (The printer’s 
power switch is turned ON for more than 16 hours.)

When a Power Failure Occurs

Summary of Contents for imageCLASS MF5950dw

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands