9
3 Make Fax Settings
The display returns to the standby mode:
The machine may enter the standby mode (Auto Clear function) while you
are setting it up. Make the setting again from the main menu.
The display turned OFF:
The machine may enter the Sleep mode while you are performing setup.
Press [Energy Saver] to turn the display back ON and continue the setup.
User Telephone Number and Unit
Name
1
Press [Menu].
2
Press
or
to select <4. TX/RX
SETTINGS>, then press [
OK
].
3
Press
or
to select <3. FAX
SETTINGS>, then press [
OK
].
4
Press
or
to select <2. USER
SETTINGS>, then press [
OK
].
5
Press
or
to select <1. UNIT
TELEPHONE #>, then press [
OK
].
6
Use – , [numeric keys] to enter your fax/
telephone number, then press [
OK
].
U N I T T E L E P H O N E #
1 2 3 X X X X X X X
Ex.
Maximum number of digits: 20 digits including spaces
If you accidentally enter an incorrect number, press
or
/ [Clear] to delete the last number.
7
Press [Menu] twice.
8
Press
or
to select <2. TX/RX
COMMON SET.>, then press [
OK
].
9
Press
or
to select <1. TX SETTINGS>,
then press [
OK
].
10
Press
or
to select <1. UNIT
NAME>, then press [
OK
].
11
Use – , [numeric keys] / [Tone] to
enter the unit name, then press [
OK
].
C A N O N
U N I T N A M E : a
Ex.
●
●
Maximum number of characters: 24 characters
including spaces
Unit name: your name, company name, etc.
If you accidentally enter an incorrect character, press
or
to move the cursor to the character that needs
correction and press [Clear] to delete the character.
12
Press [Stop/Reset] to return to the
Standby mode.
Date and Time
1
Press [Menu].
2
Press
or
to select <7. TIMER
SETTINGS>, then press [
OK
].
3
Press
or
to select <1. DATE&TIME
SETTING>, then press [
OK
].
4
Use – , [numeric keys] to enter the date
and time, then press [
OK
].
0 4 / 0 1 / ’ 1 0 1 5 : 5 0
D A T E & T I M E S E T T I N G
Ex.
Date: month/day/year
Time: in 24-hour/military time format
If you accidentally enter an incorrect number, press
or
to move the cursor to the number that needs
correction and overwrite it.
5
Press [Stop/Reset] to return to the Standby
mode.
You can select one of the following three date formats
in <3. DATE TYPE SELECT>.
<MM/DD/YYYY>
<DD/MM YYYY>
<YYYY MM/DD>
By default, the time zone is set to <GMT-5:00>. If
necessary, change <2. TIME ZONE SETTING> in the <7.
TIMER SETTINGS> menu to match the time zone at your
location. For details, see “Introduction of the Machine,”
in the e-Manual.
By default, the daylight saving time is <OFF>. If
necessary, change <6. DAYLIGHT SV. TIME> in the
<7. TIMER SETTINGS> menu to <ON>. For details, see
“Introduction of the Machine,” in the e-Manual.
–
–
–
−
−
−
−
