Canon imageCLASS MF5850dn, Basic Operation Manual

Page: 194 / 302

Fax
6-63
Checking/Changing the Status of Fax Documents in Memory
Checking/Deleting Fax Reception
Documents
You can delete the received documents in memory.
You can also forward received documents in
memory to a desired destination.
1
Press [Job Cancel/Status Monitor]
repeatedly to select <TX/RX STATUS> or
<JOB CANCEL>, then press [OK].
T X / R X S T A T U S
If you select <JOB CANCEL>, press or to
select <TX/RX>, then press [OK].
2
Press or to scroll through the job
list.
0 1 2 X X X X X X X
5 0 0 3 1 5 : 5 5 R X T R M . . .
If you want to delete a job, go to the next step.
Otherwise, press [Stop/Reset] to return to the
standby mode.
3
Press or to select the job you
want to delete, then press [OK].
1 2 3 X X X X X X X
5 0 0 1 1 5 : 5 3 R X S T N D B Y
If you select <JOB CANCEL> in step 1, skip to
step 5.
4
Press or to select <CANCEL>,
then press [OK].
C A N C E L
5 0 0 1
You can forward the selected job to another
destination by selecting <FORWARD>. For
information on forwarding received documents,
see “Sending Documents in Memory to a Different
Destination,” in the e-Manual.
5
Press to select <YES>.
< Y E S N O >
C A N C E L ?
If you do not want to delete the job, press to
select <NO>.
6
Press [Stop/Reset] to return to the
standby mode.
For the MF5880dn, you can check for the arrival of
I-faxes at any time if you select <I-FAX> in step 1.
To be able to check the arrival of I-fax using
[Job Cancel/Status Monitor], you must first set
<POP> (Post Office Protocol) to <ON> in <E-
MAIL/I-FAX> in <NETWORK SETTINGS> in
<SYSTEM SETTINGS>.