1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-6
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Basic Network Settings
Basic Network Settings are required in order to use the
following functions of the machine.
Printing or sending a fax from a computer
Using e-mail
Sending data to a file server
Before making basic network settings, confirm that the
following procedures are performed.
It is recommended that the network administrator perform the following
procedures.
1.
Network Cable Connection (See “Set the
Machine for Network Usage,” in the Starter
Guide.)
Connect the machine to your network using the network cables.
●
●
●
2.
Preparation for Protocol Settings (See “Set the
Machine for Network Usage,” in the Starter
Guide.)
Specify the machine’s IP address so that the machine and the
network computer can communicate before making protocol
settings. Any of the following can be used to specify the settings.
Machine’s operation panel (Additional Functions menu)
NetSpot Device Installer (Canon utility software included in the
User Software CD)
Interface Settings
Ethernet Driver
You can specify the communication method and Ethernet
connection type.
1.
Press [Additional Functions].
–
–
■
