1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-44
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Printing Received Documents
The machine provides the following printing features: two-sided
printing and received image reduction.
Two-Sided Printing
You can print received documents on both sides of the paper.
You can print the received documents on both sides of the paper only
when <PAPER SIZE> is set to <LTR> or <A4>. The received documents are
printed on one side of the paper when <PAPER SIZE> is not set to <LTR> or
<A4>. (See “Setting Paper Size and Type,” on p. 2-13.)
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <TX/RX SETTINGS>,
then press [OK].
3.
Press
[
] or [
] to select <TX/RX COMMON
SET.>, then press [OK].
4.
Press
[
] or [
] to select <RX SETTINGS>,
then press [OK].
5.
Press
[
] or [
] to select <TWO-SIDED
PRINT>, then press [OK].
■
6.
Press
[
] or [
] to select <ON>, then press
[OK].
7.
Press [Stop/Reset] to return to the standby
mode.
Received Image Reduction
You can print received documents in a reduced size.
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <TX/RX SETTINGS>,
then press [OK].
3.
Press
[
] or [
] to select <TX/RX COMMON
SET.>, then press [OK].
4.
Press
[
] or [
] to select <RX SETTINGS>,
then press [OK].
5.
Press
[
] or [
] to select <RECEIVE
REDUCTION>, then press [OK].
6.
Press
[
] or [
] to select <ON>, then press
[OK].
