1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-35
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Basic Receiving Method
Follow this procedure to set the machine for receiving faxes.
1.
Press [Additional Functions].
2.
Press
[
] or [
] to select <TX/RX SETTINGS>,
then press [OK].
3.
Press
[
] or [
] to select <FAX SETTINGS>,
then press [OK].
4.
Press
[
] or [
] to select <RX MODE>, then
press [OK].
5.
Press
[
] or [
] to select the receive mode,
then press [OK].
< FaxOnly>: Answers all calls as faxes.
<FaxTel>: Switches between fax and voice calls automatically if
an external telephone is connected to the machine. For optional
settings, see “FaxTel: Optional Settings,” on p. 4-36.
< AnsMode>: Receives faxes automatically and records voice
messages.
<DRPD> (Distinctive Ring Pattern Detection): Distinguishes between
fax and voice calls using distinctive ring patterns. Select the ring
pattern assigned by your telephone company. For optional settings,
see “DRPD: Optional Settings,” on p. 4-37.
<Manual>: Does not answer any calls. You have to manually receive
faxes. See “Manual Reception,” on p. 4-37.
For <FaxTel> or <Manual>, make sure an external telephone is
connected to the machine.
For <AnsMode>, make sure an answering machine is connected
to the machine.
For <DRPD>, subscription to a DRPD service is required. Contact
your telephone company for availability.
6.
Press [Stop/Reset] to return to the standby
mode.
–
–
–
