Canon ImageCLASS MF4690 Operation Manual Download

Page: 137 / 316

Sending Documents

4-40

Specifying Destinations

Follow the procedure below to send documents to registered recipients.

To send documents to a file server, you can specify the file server addresses only with one-touch keys, coded
dial codes, or [Address Book].

Using One-Touch Keys

You can specify up to 8 destinations using one-touch keys.

To use this feature, you must register destinations in one-touch keys beforehand. (See “Storing/Editing Address
Book,” on p. 4-11.)

Set documents.

Place the first page on the platen glass if you are not using the ADF.

Press [SEND/FAX] repeatedly to select the sending method, then press [OK].

To send documents to a file server, select any sending method.

Summary of Contents for ImageCLASS MF4690





























































































































































































































































































































Search results

Summary of Contents for ImageCLASS MF4690

Reviews:

Related manuals for ImageCLASS MF4690

Brands by name

Popular brands

Canon ImageCLASS MF4690, Operation Manual

Search results

Summary of Contents for ImageCLASS MF4690

Reviews:

Related manuals for ImageCLASS MF4690

Brands by name

Popular brands