Canon imageCLASS MF4370dn, Basic Operation Manual

Page: 67 / 252

Reg
ist
ering Destinations in the A
ddr
ess Book
3-6
Storing/Editing Coded Dial Codes
Storing/Editing Coded Dial Codes Storing/Editing Coded Dial Codes
This section describes how to register destinations for coded dial codes and to edit the
registered coded dial codes.
Registering Coded Dial Codes Registering Coded Dial Codes
1
Press [Menu].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
6 A D D R E S S B O O K S E T .
M E N U
3
Press [ ] or [ ] to select <CODED
DIAL>, then press [OK].
2 C O D E D D I A L
A D D R E S S B O O K S E T .
4
Press [ ] or [ ] to select a coded dial
code (00 to 99) for which you want to
register the fax number, then press [OK].
[ * 0 0 ] N O T R E G I S T E R E D
C O D E D D I A L
You can also select a coded dial code by
pressing
[Coded Dial] followed by the
desired two-digit code.
5
Enter the destination name (up to 20
letters, including spaces) with –
[numeric keys], then press [OK].
C a n o n C
N A M E
Ex.
6
Enter the fax number you register (up to
50 digits, including spaces and pauses)
with – [numeric keys], then press
[OK].
1 2 3 X X X X X X X
T E L N U M B E R E N T R Y
Ex.
To register another coded dial code, repeat the
procedure from step 4.
7
Press [Stop/Reset] to return to the
standby mode.
Editing Coded Dial Codes Editing Coded Dial Codes
1
Press [Menu].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
6 A D D R E S S B O O K S E T .
M E N U
3
Press [ ] or [ ] to select <CODED
DIAL>, then press [OK].
2 C O D E D D I A L
A D D R E S S B O O K S E T .