Canon imageCLASS MF4370dn Basic Operation Manual Download Page 19

Page: 19 / 252

xviii

Legal Notices

Legal Notic

The Software Subjected to the Other Conditions

Please refer to e-Manual on a CD-ROM bundled with this product, for more detail and corresponding license

conditions.

Disclaimers

The information in this document is subject to change without notice.

CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR

IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO

MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OF USE OR NON-INFRINGEMENT.

CANON INC. SHALL NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY

NATURE, OR LOSSES OR EXPENSES RESULTING FROM THE USE OF THIS MATERIAL.

For CA, USA only

Included battery contains Perchlorate Material - special handling may apply.

See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.

Legal Limitations on the Usage of Your Product and the Use of Images

Using your product to scan, print or otherwise reproduce certain documents, and the use of such images as

scanned, printed or otherwise reproduced by your product, may be prohibited by law and may result in

criminal and/or civil liability.

A non-exhaustive list of these documents is set forth below. This list is intended to be a guide only. If you are

uncertain about the legality of using your product to scan, print or otherwise reproduce any particular

document, and/or of the use of the images scanned, printed or otherwise reproduced, you should consult in

advance with your legal advisor for guidance.

Paper Money

–

Travelers Checks

–

Money Orders

–

Food Stamps

–

Certificates of Deposit

–

Passports

–

Postage Stamps (canceled or uncanceled)

–

Immigration Papers

–

Identifying Badges or Insignias

–

Internal Revenue Stamps (canceled or

uncanceled)

–

Selective Service or Draft Papers

–

Bonds or Other Certificates of Indebtedness

–

Checks or Drafts Issued by Governmental

Agencies

–

Stock Certificates

–

Motor Vehicle Licenses and Certificates of Title

–

Copyrighted Works/Works of Art without

Permission of Copyright Owner

–

Summary of Contents for imageCLASS MF4370dn





























































































































































































































































Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands

Canon imageCLASS MF4370dn, Basic Operation Manual

Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands