Canon imageCLASS MF4370dn Basic Operation Manual Download Page 180

Page: 180 / 252

10-7

aint

enanc

Cleaning the Machine

Close the ADF.

Be careful not to get your fingers caught.

ADF (For MF4380dn)

If your documents have black streaks or appear

dirty after copying them using the ADF, this may be

caused by pencil lead rubbing off the documents

and onto the roller. Clean the ADF scanning area

and roller.

Turn OFF the main power switch and
disconnect the power cord.

Open the ADF cover.

●

Clean the rollers (A) inside the ADF with a
cloth dampened with water. Then wipe
the area with a soft, dry cloth.

Do not dampen the cloth too much, as this may
tear the document or damage the machine.

Close the ADF cover.

Be careful not to get your fingers caught.

Reconnect the power cord and turn ON
the main power switch.

Summary of Contents for imageCLASS MF4370dn





























































































































































































































































Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands

Canon imageCLASS MF4370dn, Basic Operation Manual

Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands