Canon imageCLASS MF4370dn Basic Operation Manual Download Page 17

Page: 17 / 252

xvi

Legal Notices

Legal Notic

Copyright

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in

any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without

the prior written permission of Canon Inc.

This product contains software made available to Canon Inc. or its licenser(s) under the terms (a) through (c)

listed below.

(a)

Redistribution and use in source and binary forms are permitted provided that the above copyright notice

and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and

other materials related to such distribution and use acknowledge that the software was developed by the

University of California, Berkeley. The name of the University may not be used to endorse or promote products

derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED “AS IS’’ AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

The software was developed by the University of California, Berkeley.

(b)

Redistribution and use in source and binary forms are permitted provided that the above copyright notice

and this paragraph are duplicated in all such forms and that any documentation, advertising materials, and

other materials related to such distribution and use acknowledge that the software was developed at Cygnus

Support, Inc. Cygnus Support, Inc. may not be used to endorse or promote products derived from this

software without specific prior written permission.

THIS SOFTWARE IS PROVIDED “AS IS’’ AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

The software was developed at Cygnus Support, Inc.

Summary of Contents for imageCLASS MF4370dn





























































































































































































































































Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands

Canon imageCLASS MF4370dn, Basic Operation Manual

Search results

Summary of Contents for imageCLASS MF4370dn

Reviews:

Related manuals for imageCLASS MF4370dn

Brands by name

Popular brands