manualshive.com logo in svg

Canon imageCLASS MF416dw, User Manual

Share
Download
Canon imageCLASS MF416dw User Manual Download Page 796

Platen Glass

0UWX-0CK

Regularly wipe off the dust from the platen glass and the underside of the feeder to prevent smudges to be printed on

documents or printouts.

1

Turn OFF the machine, and unplug the power cord from the AC power outlet.

●

When you turn OFF the machine, data that is waiting to be printed is deleted. Fax documents that were
received by using the Memory Reception function, faxes that are waiting to be sent, and reports that are
automatically printed after sending and receiving faxes are not deleted.

2

Open the feeder.

3

Clean the platen glass and the underside of the feeder.

●

Clean the areas with a cloth dampened with water. Then, wipe the area with a soft, dry cloth.

●

In addition to the platen glass and underside of the feeder, make sure to clean and wipe the white strip of
plate (

) and the surface of the transparent plastic part (

), too.

●

When wiping the transparent plastic part (

), take care not to bend the plastic.

If the problem persists

Remove the transparent plastic part (

) and wipe it.

1

Hold the tabs (

) at both ends of the transparent plastic part, and remove the plastic part by gently

lifting the rearward end first.

Maintenance

787

Summary of Contents for imageCLASS MF416dw






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands