1
2
3
4
5
6
5-4
Printer locks up system.
Q
Does your system setup have a problem?
A
Make sure that you have a high-quality shielded
interface cable.
A
The problem might be in your BIOS. Verify that
your BIOS setup is correct. (See your computer’s
documentation for details.)
A
Verify that your physical memory is working
correctly.
A
If you have a Toshiba laptop, change the following
line in your CONFIG.SYS. file:
c:\winutils\mxtime.exe
to:
REM c:\winutils\mxtime.exe
Computer indicates a device time-out.
Q
Is the machine off, offline, or not connected to
the computer?
A
Make sure the machine’s interface cable is
securely connected to both the machine and the
computer.
A
Make sure paper is properly loaded in the machine.
A
Reset the machine and the computer.
A
Try the print operation again.
A
Try a different cable.
