1
2
3
4
5
6
1-6
Receiving Features
You can set receive mode that suits your needs. The
machine also provides the following receiving features:
memory reception, reception restriction, and remote
reception.
■
Setting Receive Mode
To determine the right mode for you, see “Set the Machine for
Receiving Faxes,” in the Starter Guide.
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <FAX
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <RX SETTINGS>,
then press [OK].
4.
Use [
] or [
] to select <RX MODE>,
then press [OK].
5.
Use [
] or [
] to select the desired
receive mode, then press [OK].
<FaxOnly>: Answers all calls as faxes and disconnects voice
calls.
<AnsMode>: Receives faxes automatically and records voice
messages.
<DRPD> (Distinctive Ring Pattern Detection): Distinguishes
between fax and voice calls using distinctive ring patterns. Select
the ring pattern assigned by your telephone company. For
optional settings, see “DRPD: Optional Settings,” on p. 1-8.
<FAX/TEL>: Switches between fax and voice calls automatically.
For optional settings, see “FAX/TEL: Optional Settings,” on p. 1-7.
<MANUAL>: Does not answer any calls. You have to manually
receive faxes.
NOTE
– For <DRPD>, <FAX/TEL>, or <MANUAL> make sure an
external telephone is connected to the machine.
– For <AnsMode>, make sure an answering machine is
connected to the machine.
– For <DRPD>, subscription to a DRPD service is required.
Contact your telephone company for availability.
6.
Press [Stop/Reset] to return to standby
mode.
