manualshive.com logo in svg

Canon imageCLASS MF273dw, User Manual

Share
Download
Canon imageCLASS MF273dw User Manual Download Page 503

Paper Jams That Occur Repeatedly

94LS-0E8

Troubleshoot by checking the items below.

Are There Paper Scraps or Foreign Objects Inside the Machine?

Remove any paper scraps or foreign objects.  Paper Jams(P. 487) 

Are You Using Appropriate Paper?

Check whether the paper in the machine is usable, and replace it with appropriate paper, as needed.

Usable Paper(P. 20) 

Loading Paper(P. 133) 

Is Paper Loaded Correctly?

●

Fan the paper thoroughly in small batches so that it is not stuck together.

●

Align the edges by tapping the paper on a flat surface a few times before loading the paper.  Loading
Paper(P. 133) 

●

Make sure the loaded paper does not exceed the load limit line (

).

 

●

Check that the paper guides are not too loose or too tight.

 

Do Paper Jams Occur When Printing on the Back Side of Printed Paper?

Flatten the edges of the paper to thoroughly remove any curls.

* When printing on the back side of printed paper, you can only use paper printed with this machine. Do not

use paper printed with another printer or multifunction machine, as this can cause paper jams or damage the

machine.

Does This Occur When Printing Continuously?

If so, setting [Correct Paper Conveyance] to [On] may reduce the frequency of paper jams.

Touch Panel Model

On the [Home] screen of the operation panel   [Menu]   [Adjustment/Maintenance]   [Adjust Image
Quality]   [Special Processing]   [Correct Paper Conveyance]   [On]

5 Lines LCD Model

Troubleshooting

494

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands