Canon imageCLASS MF273dw, User Manual, Page: 447 / 633

[On]
[Set Line]
[Menu] [Function Settings] [Send] [Fax Settings]
Specify the machine’s fax number, unit name, and the number of lines.
* The fax number and unit name are sent to the recipient as sender information. [TX Terminal ID](P. 439)
[Register Unit Telephone Number]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Register the fax number of the machine. Changing the Fax Number and Unit Name(P. 225)
[Register Unit Name]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Register the name (unit name) sent to the other party. Changing the Fax Number and Unit Name(P. 225)
[Select Line Type]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
If the machine is connected to a Private Branch Exchange (PBX) or to a line that is shared with a home phone or
business phone, the line type may not be selected automatically. If so, select [Manual] and specify the line type.
* Normally, if you connect the machine to a phone line and restart the machine, the line type is selected
automatically. Configuring the Fax Settings (Fax Setup Guide) (Touch Panel Model)(P. 95)
[Pulse]
[
Tone ]
[TX Start Speed]
[Menu] [Function Settings] [Send] [Fax Settings]
It may take some time for transmission to begin due to factors such as a poor phone line connection. If this occurs,
adjust the initial communication speed to a lower level.
[ 33600 bps ]
[14400 bps]
[9600 bps]
[7200 bps]
[4800 bps]
[2400 bps]
[Confirm Entered Fax Number]
[Menu] [Function Settings] [Send] [Fax Settings]
Specify whether a screen for re-entering the number appears when you enter a fax number using the numeric keys.
Confirming the Destination before Sending(P. 327)
[ Off ]
[On]
Settings Menu Items
438