Canon imageCLASS MF273dw User Manual Download Page 32 | Manualshive

Page: 32 / 633

background image

Precautions When Handling Paper

94LS-00H

To prevent paper jams and other errors and ensure beautiful printing, you must take precautions when handling and

storing paper.

To maintain the quality of printed paper, pay attention when storing and gluing paper.

◼

Handling and Storing Paper

Acclimating the Paper to the Usage Environment

Before using the paper in the machine, be sure to fully acclimate the paper to the environment where the

machine is located. Immediately using paper stored in a location with a different temperature or humidity

can cause paper jams or printing errors.

Storing Paper Before Use

●

It is recommended that you use paper as soon as possible after opening the package. Any remaining
paper should be wrapped in the original package and stored on a flat surface.

●

To protect the paper from moisture or dryness, keep the paper wrapped in its package until use.

●

Do not store the paper so that it curls or folds.

●

Do not store the paper vertically, and do not stack too much paper.

●

Do not store the paper in direct sunlight, or in a place with high humidity, dryness, or a drastically different
temperature or humidity compared to the usage environment.

◼

Storing and Gluing Printed Paper

Storing Paper

●

Store the paper on a flat surface.

●

Do not store the paper together with items made of polyvinyl chloride (PVC) such as a clear folder. The
toner may melt, causing the paper to stick to the PVC material.

●

Do not store the paper folded or creased. Toner may peel off.

●

Do not store the paper in a place with high temperature.

●

When storing the paper for a long period of time (two years or longer), store in a binder or similar item.

●

Storing the paper for a long period of time can cause a discoloration of the paper, resulting in a
discoloration of printed images.

Precautions When Gluing Printed Paper

●

Always use insoluble adhesives.

●

Before applying adhesive, perform a test using an unneeded printout.

●

Allow glued paper to fully dry before stacking.

About the Machine

23

«
...
30
31
32
33
34
...
»

Summary of Contents for imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for imageCLASS MF273dw

Brand: Xerox Pages: 24

COLOR SYSTEM 110

Brand: Oce Pages: 392

Panafax UF-9000

Brand: Panasonic Pages: 375

Brand: Panasonic Pages: 166

Brand: Oki Pages: 1

imageRUNNER 5075

Brand: Canon Pages: 502

imageRUNNER 5075

Brand: Cannon Pages: 268

Brand: Katun Pages: 2

Brand: U-Line Pages: 18

Brand: Konica Minolta Pages: 8

Brand: Evolis Pages: 63

Brand: Lexmark Pages: 8

SEH InterCon PS54a-G

Brand: SEH Pages: 24

Brand: VORON Pages: 73

Brand: SPRT Pages: 17

Brand: GeBe Pages: 25

Brand: Canon Pages: 236

Brand: Canon Pages: 1366

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands