manualshive.com logo in svg

Canon IMAGECLASS MF247dw, User Manual

Share
Download
Canon IMAGECLASS MF247dw User Manual Download Page 590

Special Processing (P. 525)

Printouts Are Grayish

Is <Correct Density> in <Copy Settings> set too dark?

●

Adjust the setting so that density is lighter.

Correct Density(P. 497)

Is the printer installed where it is subject to direct sunlight or strong light?

●

Install the printer in an appropriate location.

Installation(P. 3)
Relocating the Machine(P. 607)

Was the toner cartridge been left in direct sunlight for a long period of time?

●

Store the toner cartridge in an appropriate location for two to three hours, then try printing again. This
may solve the problem. If the problem persists, replace the toner cartridge.

Replacing Toner Cartridges(P. 599)

Cannot Scan a Printed Barcode

Are you trying to scan a barcode printed with factory default settings?

●

In the printer driver, specify [Special Settings 1] for the setting of [Special Print Mode].

●

When  set  to  [Special  Settings  1],  print  density  is  lighter  compared  with  [Off].  Text  and  lines  may  also
appear faded.

●

White specks may appear in images when this feature is used with paper other than lightweight paper.

Troubleshooting

582

Summary of Contents for IMAGECLASS MF247dw











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands