manualshive.com logo in svg

Canon IMAGECLASS MF247dw, User Manual

Share
Download
Canon IMAGECLASS MF247dw User Manual Download Page 589

Is the drum in the toner cartridge deteriorated?

●

Replace the toner cartridge with a new one.

Replacing Toner Cartridges(P. 599)

Are you printing a document with strong contrasts?

●

Change the setting for [Special Print Mode] using the Printer Driver.

When set to [Special Settings 2], print density is lighter compared with [Off] or [Special Settings 1]. Text and

lines may also appear faded.

A Portion of the Page Is Not Printed

Do you print data without margins?

●

This  symptom  occurs  if  a  margin  is  set  to  none  in  the  printer  driver.  A  margin  of  1/4"  (5  mm)  or  less
around the edge of paper or 3/8" (10 mm) or less around the edge of envelopes is not printable with the
machine. Make sure to have margins around the document to print.

[Finishing] tab   [Advanced Settings]   [Expand Print Region and Print]   [Off]

Print Density Is Uneven

Is the amount remaining in the toner cartridge nearly empty?

●

Check the amount remaining in the toner cartridge, and replace the toner cartridges as necessary.

Replacing Toner Cartridges(P. 599)

Is printing sometimes uneven when printing fine lines?

●

Change the setting for <Special Printing Mode J>.

Troubleshooting

581

Summary of Contents for IMAGECLASS MF247dw











































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands