Canon imageclass MF244DW User Manual Download Page 87

Page: 87 / 477

Copying Both Sides of an ID Card onto One Page

15A8-01J

You can use <ID Card Copy> to copy the front and back sides of a card onto the same side of

a page. This function is useful when copying a driver's license or ID card.

●

All regular paper sizes can be used except Letter (Government), Legal (Government), and Envelope.

●

<Copy Ratio> is automatically set to <Copy Ratio: 100% (1:1)>.

●

<ID Card Copy> is not available when using <Paper Save Copy>, <2-Sided>, or <2 on 1>/<4 on 1>.

Place the card

(ID Card Copy)

Turn the card over

How to place the card

●

When the <Size/Settings Mismatch> message appears. When an Error Message Appears(P. 347)

LINKS

Basic Copy Operations(P. 65)

Copying

Summary of Contents for imageclass MF244DW






























































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass MF244DW

Reviews:

Brands by name

Popular brands

Canon imageclass MF244DW, User Manual

Search results

Summary of Contents for imageclass MF244DW

Reviews:

Brands by name

Popular brands