manualshive.com logo in svg

Canon imageCLASS LBP913w, User Manual

Share
Download
Canon imageCLASS LBP913w User Manual Download Page 264

Paper Jams inside the Machine

27WS-054

Remove the jammed paper according to the procedure below. Do not forcibly remove jammed paper from the

machine. If the jammed paper cannot be removed easily, proceed to the next step.

1

Remove the output cover.

2

Close the paper stopper, and then open the toner cover.

3

Remove the drum cartridge.

Do not shake or tilt the drum cartridge. Also, make sure to avoid applying shocks to the drum cartridge, such

as by hitting it against something. Doing so may cause the toner left in the drum cartridge to leak. Remove

the drum cartridge gently at the same angle as the slot.

Troubleshooting

259

Summary of Contents for imageCLASS LBP913w








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands