Canon imageCLASS LBP913w, User Manual

Page: 182 / 327

<WPS Push Button Mode>
Select to automatically configure a wireless connection by using the button on a WPS wireless router. Setting
Up Connection Using WPS Push Button Mode(P. 26)
<WPS PIN Code Mode>
Select to configure a wireless connection by entering a PIN code for a WPS wireless router. Setting Up
Connection Using WPS PIN Code Mode(P. 28)
<Power Save Mode>
Select whether or not the machine enters Power Save Mode based on signals emitted from the wireless router.
<Off>
<On>
<Menu> <Network Settings> <Wireless LAN Settings> Read the displayed message
<OK> <Power Save Mode> Select <Off> or <On>
<Wireless LAN Information>
Select to view the current wireless LAN settings. Viewing Network Settings(P. 43)
<MAC Address>
<Wireless LAN Status>
<Latest Error Information>
<Channel>
<SSID Settings>
<Security Settings>
<Power Save Mode>
<Direct Connection Settings>
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an
environment without an access point or wireless LAN router. Connecting Directly (Access Point Mode)(P. 112)
<Use Direct Connection>
<Off>
<On>
<Direct Connection Only>
<Wireless LAN/Direct Conn. (Auto Switch)>
<Time Until Direct Connection Termination>
Specify the time to automatically disconnect after Direct Connection is established.
0 (Do not terminate session automatically)
1 to 10 to 60 (min.)
Setting Menu List
177