manualshive.com logo in svg

Canon imageCLASS LBP913w, User Manual

Share
Download
Canon imageCLASS LBP913w User Manual Download Page 129

If AirPrint Cannot Be Used

27WS-02U

If AirPrint cannot be used, try taking the following solutions.

●

Make sure that the machine is turned ON. If the machine is turned ON, first turn it OFF, then wait for at least 10
seconds and then turn it back ON to check if the problem is solved.

●

Make sure that no error messages are displayed on the machine.

●

Make sure that Apple devices and the machine are connected to the same LAN. If the machine is turned ON, it may
take several minutes before the machine is ready for communication.

●

Make sure that Bonjour on your Apple device is enabled.

●

For printing, make sure that the paper is loaded in the machine and that the machine contains a sufficient amount
remaining in the toner cartridge and the drum cartridge.  Displaying the Screen for AirPrint(P. 118) 

Linking with Mobile Devices

124

Summary of Contents for imageCLASS LBP913w








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands