Canon IMAGECLASS LBP654CDW, User Manual, Page: 202 / 621

Specifying the paper size
<RX Print Size>(P. 397)
● Depending on the network you are using, you may need to change the POP3 port setting ( Changing Port
Numbers(P. 243) ). For more information, contact your Internet service provider or Network Administrator.
Receiving I-Faxes Manually
If the I-Fax RX setting is completely configured from the POP3 server, you can manually receive I-Faxes and
print them. When you want to connect to the server before receiving I-Faxes automatically, or when the
machine is configured so that it does not receive I-Faxes automatically, use the method below to receive I-Faxes
manually.
1
Press <Status Monitor> ( ).
2
Select <RX Job>.
3
Select <Check I-Fax RX>.
➠
Connect to the POP3 server. If there is a document on the server, printing begins.
● Printing a Received Document on Both Sides of Paper: <Print on Both Sides>(P. 396)
● Continuing printing even when toner is running low: <Continue Print. When Cart. Low>(P. 396)
Printing
196