Configuring the Method of
Connecting to a Computer
1.
2.
Configure the initial settings, according to the
screen.
• Set the language and country/region.
• Set the time zone and current date/time.
• Configure the settings to prevent unauthorized
access.
• For the purpose of confirmation, enter the
same PIN twice.
Before starting the configuration
• The machine cannot be connected to both
wired and wireless LANs at the same time.
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if necessary.
• Even in an environment without wireless
LAN router, you can use Access Point
Mode to make a wireless connection to
the machine directly from your mobile
device (Direct Connection).
User's Guide
Specifying the connection method
No
Yes
Use wireless LAN to
connect to network?
(Can config. later.)
• To connect via wireless LAN : <Yes>
• To connect via wired LAN or USB : <No>
To connect via wireless LAN
1.
Make sure that the computer is connected to a
router properly.
2.
Check the network settings on the computer.
N O T E
Parts and functions of the operation panel
P.30 "Start the Operation from the Operation
Configuring the Initial Settings of
the Machine
6
Configuring the Machine
Configure the settings in the following order.
Quick Setup
En
Summary of Contents for imageCLASS LBP621Cdw
