manualshive.com logo in svg

Canon imageCLASS LBP612Cdw, User Manual, Page: 470 / 621

Share
Download
Canon imageCLASS LBP612Cdw User Manual Download Page 470

Printouts Are Faded

Is the amount remaining in toner cartridge running low?

●

Check  how  much  the  amount  remaining  in  toner  cartridges  is  left,  and  replace  the  toner  cartridges  as
necessary.

Replacing the Toner Cartridge(P. 427)

Are you using appropriate paper?

●

Check  usable  paper,  and  replace  with  appropriate  paper.  Also,  specify  the  paper  size  and  type  settings
properly.

Available Paper(P. 521)
Loading Paper(P. 124)
Specifying Paper Size and Type(P. 144)

 

Are you using paper containing much paper dust? (LBP654Cdw)

●

Using  paper  containing  much  paper  dust  may  result  in  a  faded  or  streaky  printout.  Setting  <Corr.  Img.
Corrup. by Ppr Dust> to <On> may solve the problem.

<Corr. Img. Corrup. by Ppr Dust>/<Correct Image Corrupted by Paper Dust>(P. 341)

●

If you set to <On>, the printing speed may be slower.

 

Are printouts faded immediately after toner cartridge replacement?

●

Printouts  may  be  faded  immediately  after  replacement  of  toner  cartridges  with  new  ones.  In  this  case,
setting <Rdc. Faint Print After Rplc. Cart.> to <On> may solve the problem.

<Rdc. Faint Print After Rplc. Cart.>/<Reduce Faint Print After Replacing Cart.>(P. 344)

●

If you set to <On>, the setting will become effective with next replacement of toner cartridges.

●

Immediately  after  cartridge  replacement,  a  certain  amount  of  time  is  required  for  toner  to  be  evenly
distributed inside the cartridge.

 

Is the print faded or uneven in density depending on the paper type or the

environmental conditions? (LBP654Cdw)

●

Change the setting for <Reduce Toner Flaking>. The improvement effect is stronger with <Mode 2> than
<Mode 1>. First try with <Mode 1>.

Troubleshooting

464

Summary of Contents for imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Reviews:

No comments