manualshive.com logo in svg

Canon imageCLASS LBP612Cdw, User Manual, Page: 222 / 621

Share
Download
Canon imageCLASS LBP612Cdw User Manual Download Page 222

If AirPrint Cannot Be Used

1648-07F

If AirPrint cannot be used, try taking the following solutions.

●

Make sure that the machine is turned ON. If the machine is turned ON, first turn it OFF, then wait for at least 10
seconds and then turn it back ON to check if the problem is solved.

●

Make sure that no error messages are displayed on the machine.

●

Make sure that Apple devices and the machine are connected to the same LAN. If the machine is turned ON, it may
take several minutes before the machine is ready for communication.

●

Make sure that Bonjour on your Apple device is enabled.

●

Make sure that the machine is configured to enable execution of jobs from a computer even when no department
ID and password are entered.  Blocking Jobs When Department ID Is Unknown(P. 230)

●

For printing, make sure that the paper is loaded in the machine and that the machine contains a sufficient amount
remaining in the toner cartridges.  Displaying the Screen for AirPrint(P. 210)

Linking with Mobile Devices

216

Summary of Contents for imageCLASS LBP612Cdw














































































































































































































































































































































































































































































































































































































































Reviews:

No comments