Canon imageCLASS LBP325dn Service Manual Download Page 137

Page: 137 / 252

External Cover System

Removing the Rear Cover Unit

■ Procedure

1. Remove the Rear Cover Unit.

NOTE:

Procedure for Installing the Rear Cover Unit

1. Put the 2 hooks of the Rear Cover inside the Upper Cover.

2. Install the 2 screws that were removed.

Removing the Cartridge

■ Procedure

CAUTION:

When handling the cartridge, be sure to follow the CAUTION shown below.

1. When removing the cartridge, be sure to block light to the Photosensitive Drum. Cover the removed drum with 5 or

more sheets of paper to block light.

2. Do not place the cartridge in a location where it is exposed to direct rays of the sun (e.g. near the window).

5. Parts Replacement and Cleaning

127

Summary of Contents for imageCLASS LBP325dn




























































































































































































































































Search results

Summary of Contents for imageCLASS LBP325dn

Reviews:

Related manuals for imageCLASS LBP325dn

Brands by name

Popular brands

Canon imageCLASS LBP325dn, Service Manual

Search results

Summary of Contents for imageCLASS LBP325dn

Reviews:

Related manuals for imageCLASS LBP325dn

Brands by name

Popular brands