Canon imageclass LBP251dw User Manual Download Page 475

Page: 475 / 495

Enter a keyword or keywords and click

to display the search results in the search result list (

). You

can search for pages containing all the keywords by separating the keywords by a space (blank). Also you

can only search for pages containing an exact phrase by enclosing the keywords in double quotation

marks.

[Search options]

Click to specify search conditions such as scope of search and fuzzy match conditions. To display the

conditions, click this button when it is gray. To close the display, click the button when it is orange.

Search scope selector

Specifies the search scope. You can efficiently search for topics by narrowing the search scope. The search

scope selector is especially useful when you can predict the general location of the topic that you are

looking for.

Search options selector

Select the check box to make your search case-sensitive.

[Search with these conditions]

Click to display the search results with the conditions specified with

and

Search result list

Displays the search results of the pages that contain the specified keywords. From the results, locate the

page you are looking for and click the topic title of the page. If the results cannot be displayed on one

page, click

or a page number to display the results on the corresponding page.

Site Map

Displays the table of contents for the e-Manual.

Chapter icons

Click to jump to the topic of the selected chapter.

Title (Topic)

Displays titles and topics. Click a title or topic to jump to the page.

Click to return to the page top.

Click to go to the previous or next chapter.

Appendix

469

Summary of Contents for imageclass LBP251dw
















































































































































































































































































































































































































































































































Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands

Canon imageclass LBP251dw, User Manual

Search results

Summary of Contents for imageclass LBP251dw

Reviews:

Related manuals for imageclass LBP251dw

Brands by name

Popular brands